Automotive wiring harness crimping process

1, automotive wiring harness crimping process
After the opening of the second production station, according to the type of drawings required to determine the crimp parameters, the production of crimp operation instructions, for the special requirements of the need to specify the process documents and training operators.

2.In order to improve the efficiency of assembly, the complex wiring harness should set the pre-installed station, the pre-installation process is reasonable or not directly affect the efficiency of the total assembly also reflects a process personnel. In order to improve the efficiency of the assembly, The level of technical level.

3, the car wiring harness assembly process According to the product development department design of the assembly board, design tooling equipment, material box size and all the assembly sheath and accessories number affixed to the material box to improve the assembly efficiency.4, the test of the wiring harness In order to ensure the quality of the wiring harness, wiring harness inspection also runs through each link in the production, because the wiring harness mainly play a connection so the terminal crimp demanding, contact or a terminal at the same time connect two or Two or more wires, select the cross-sectional area of the larger wire measurement tension.5, bus technology The world's common car bus control methods are two: LONWORKS bus and CAN bus. Regardless of which purpose is to improve the harness reliability, reduce the number of traditional wires, to achieve the digital signal transmission circuit.