Analysis of the reason why the electron beam is not electrified

Electronic wiring harness is one of our common electrical conductor, often used in various types of electrical products, and in the process of using electronic wiring harness we often encounter such a situation that the electronic wiring harness is not energized, resulting in no electrical products , Or lead to electrical products failure and so on, the following into a wire harness processing factory for your analysis of the reasons for the lack of electricity electron beam!

1, it is possible that the insulator is aged: the aging of the insulator cracks so that the wire harness can not be normally energized, because during prolonged use, the insulator will be badly dissipated or overloaded, thus being damaged. So for security reasons it is necessary to change wiring harness in time.

2, insulation damp: It may be improper use, or improper construction, resulting in damp insulation, which further leads to the harness can not be normal power. Because in some humid environment, the use of Harmonic Harmonic resonance occurs, the occurrence of cracks, the water molecules easier to enter, it will lead to damp electronic harness. Then in view of this situation, we should promptly strengthen the protection of the insulation layer, in serious cases or consider replacing the wiring harness.

3, was destroyed: In the process of using the harness due to improper operation, damage to the harness, resulting in excessive bending of the harness or other symptoms, resulting in it can not be normal power, then this time we must first check what is the condition, and then To repair, can not be repaired to consider the replacement harness.

4, the voltage is too large: that is, the voltage level is too large lead to breakdown, resulting in wiring harness can not power failure.