Wiring duct,Cable Gland,Cable Tie,Terminals,RCCN

Not all machine tools are suitable for transformation, or even to say, machine transformation is a high threshold thing.

First of all, the machine's own conditions too hard, straightforward point that is worth the change. The general machine tools are all machine tool "brand name goods", their excellent quality, although because of the long time and its own hardware equipment a bit outdated, but equipped with numerical control systems and other "advanced" stuff, immediately replaced the old look, become a processing good helper.

Second, precision machining and good stability. Rebuild the old machine because of a lot of expensive old machine precision, processing stability, but due to the long wait, labor-intensive, and on the verge of scrapping. After such an old machine has been refurbished, repaired and maintained, its work efficiency is high, while the cost is much lower than that of a new machine of the same quality.

Finally, the cost is right and worth redeveloping. No matter how good the machine itself, the accuracy and then superior, if the transformation costs more than the same type of renewal, or not worth the transformation. While older machines had natural advantages in terms of stress and stability, once they exceeded cost control, they could only go down the path of being eliminated.

How the "high-gene" shabby machine tool revived?

The above said, machine tool transformation is a "high threshold" of the living, the basic can be transformed machine tools have a "high gene." So how do these high-genetically engineered machines come back to life?

"Brain-changing" is a more common type of machine tool. The so-called "brain-changing", is the original human-controlled ordinary machine installed by the computer-controlled numerical control system. Such machine tools are often not much of their own problems, but less productivity on the development of the times. At this time "for a brain", they immediately from the old machine into a scientific and technological "new machine." This transformation is also immediate results: reduced labor costs, machine control accuracy is more secure. So "brain-changing" this transformation in the transformation of the machine is very popular.

Second, for heart

The most prone to the problem of the old machine is "feeling powerless." Is manifested is lack of motivation, accuracy decline. In addition to these core components of the problem, the "hearth" transformation is appropriate. In general, such modifications will retain the advantages of the machine tool, and make customized replacement for parts that are technically prone to be eliminated or damaged, such as more advanced servo motors, hydraulic system modification, and replacement of drive components. After the "heart" old machine tool processing effect back to the past, then young and energetic.

Third, change the bone

There is another type of old machine is the most interesting, where it is not where the comfort. Like an old man, not waist and leg soreness, that is, cervical pain. Such machines are generally to be checked and modified whole body, just like all the bones apart and then install the same. In fact, the most complex transformation of such machines, in addition to parts replacement and maintenance, there are precision recovery and upgrade. Otherwise, the transformation of the machine surface flow of maintenance.

Although the old machine is in the retirement period, but its precision casting, the traditional process of quenching the longer the base of the workpiece, the better the stability of the stress and accuracy, the workpiece fatigue resistance, anti-deformation ability, the application value is also high. Therefore, the transformation of the machine is not turning waste into treasure, but to reproduce the treasures of life. Remanufacturing industry is not only the emergence of green energy-saving environmental requirements, but also the cost of corporate control needs. In particular, machine tools such as "expensive" machines, enterprises to replace the pressure of a new batch of equipment, although not lethal, but also not easy to talk about. However, the transformation of machine tools, production efficiency is guaranteed at the same time for enterprises to save millions of equipment replacement costs, why not?