Where is the cold-pressed terminal block in use?

In the use of cold-pressed terminals, what are the places that need our attention? The following small series will introduce you to this knowledge.

1. When we are cleaning the cold-pressed terminals, we can use the silk cloth with absolute ethanol directly, and then use it after drying. At this time, we actually need to pay attention to it. In fact, it is not allowed to use a chemical solvent such as acetone which may have a detrimental effect on the connector.

2. When the cold-pressed terminals are connected or separated, the plug and the shaft core of the socket should be overlapped as much as possible, and the cable should be righted up so that the plug can be prevented from being subjected to our tangential force. One effect, in this way, is to prevent damage to our connectors caused by sagging cables.

3. The cold-pressed terminal must be energized before it is properly connected or fully locked. Furthermore, for a series of applications such as the use of a cold-pressed terminal and the clamping of its wire harness, when we use a threaded connection, there should be a locking device, mainly a locking screw and The anti-loose ring is also a device such as a fuse.

Everyone is using, the precautions of these above in the cold-pressed terminal block, we must remember.