What are the main points for installing wire and cable joints in electric power construction?
Date:2019-05-08 origin:RCCN Visit:9934
In the power engineering installation, the cable terminal head and the intermediate joint are important electrical equipment components in the transmission and transformation cable line. Its function is to disperse the electric field at the shielded and cut-off position of the cable terminal, and protect the cable from being broken down. Internal and external insulation and waterproofing. In the cable line, more than 60% of the accidents are caused by the accessories, so the quality of the joint accessories is very important for the safety and reliability of the entire power transmission and transformation.
1, the connection of the conductor
Conductor connections require low electrical resistance and sufficient mechanical strength, and sharp corners cannot occur at the joints. Medium and low voltage cable conductor connections are commonly used for crimping. Crimp should be noted:
(1) selecting a conductor connecting tube of suitable electrical conductivity and mechanical strength;
(2) The inner diameter of the crimping tube and the outer diameter of the connected core are taken to be 0.8 to 1.4 mm;
(3) The resistance of the joint after crimping shall not be greater than 1.2 times that of the conductor of equal section, and the tensile strength of the copper conductor joint shall not be less than 60N/mm2;
(4) Before the crimping, the outer surface of the conductor and the inner surface of the connecting tube are coated with a conductive adhesive, and the oxide film is broken by a wire brush;
(5) The connecting tube, the sharp corners on the core conductor, the burrs, etc., are smoothed with a trowel or sandpaper.
2, the inner semiconductor shielding treatment
Where the cable body has an inner shielding layer, the inner shielding layer of the joint of the crimping tube conductor portion must be restored when the joint is made, and a part of the inner semiconductor shield of the cable is left so that the inner shields of the connecting head on the connecting tube can communicate with each other. The continuity of the inner semiconductor is ensured so that the field strength at the joint is evenly distributed.
3. Processing of external semiconductor shielding
The outer semiconductor shield is a semi-conductive material that acts as a uniform electric field on the outside of the cable and the joint insulation. Like the inner semiconductor shield, it plays an important role in the cable and the joint. The outer semiconductor port must be neat and uniform and requires a smooth transition from the insulation, and the semiconductor winding of the joint is connected to the external semiconductor shield of the cable.
4, cable reaction force cone processing
During the construction, the shape and the correct response force cone are equal. The potential distribution on the whole cone surface is equal. When making the cross-linked cable reaction cone, the special cutting tool is generally used, or the micro-fire can be slightly heated, and the fast knife is used. After cutting, after basic molding, it is then scraped with 2mm thick glass, and finally sanded from coarse to fine with sandpaper until smooth.
5, metal shielding and grounding treatment
The role of the metal shield in the cable and the joint is mainly used to conduct the cable fault short-circuit current, and the electromagnetic interference of the shielded electromagnetic field to the adjacent communication equipment. In the operating state, the metal shield is at zero potential in a good grounding state, after the cable fails It has the ability to conduct short-circuit currents in a very short time. The grounding wire should be soldered reliably. The metal shielding and armoring tape on the cable body of the two ends of the box are firmly welded, and the grounding of the terminal head should be reliable.
6. Sealing and mechanical protection of the joint
The sealing and mechanical protection of the joint is a guarantee for the safe and reliable operation of the joint. Moisture and moisture should be prevented from penetrating into the joint. In addition, joint protection grooves or cement protection boxes should be installed at the joints.
Related articles
-
线槽的作用及叫法
线槽的作用及叫法
-
2009第四届中国(上海)国际母线线槽及桥架工业展览会
金属线槽、镀锡母线槽、铝合金母线槽、钢外壳母线槽、组合式线槽、防碾压踩踏线槽 、机械设备配电线槽、电话线槽、PVC线槽、地板线槽、插接母线线槽、微动力及照明母线槽、高中低压电流空气式绝缘插接母线槽、带散热片密集型绝缘插接式线槽、全封闭树脂浇注母线槽(防水、防火、防腐母线槽)、共箱高低压母线槽及轨道交通专用线槽等周边相关加工配套产品。
-
线槽规格和品种以及线缆的敷设
线槽规格和品种以及线缆的敷设
-
低烟无卤阻燃型走线槽
低烟无卤阻燃型走线槽
-
PVC线槽的安装-综合布线
线槽安装时,应注意与强电线槽的隔离。布线系统应避免与强电线路在无屏蔽、距离小于20cm情况下平行走3米以上。如果无法避免,该段线槽需采取屏蔽隔离措施。进入家具的电缆管线由最近的吊顶线槽沿隔墙下到地面,并从地面镗槽埋管到家具隔断下。
-
线槽用PVC是什么材料
在塑料制品中,线槽的主要原料是PVC.
-
线槽规格
线槽规格,上海日成-RCCN,专业制造线槽,技术团队及丰富经验,提供PVC线槽、行线槽、配线槽在工业设计、机械设计等配电柜综合布线解决方案.专业服务于外资及国内品牌有线槽需求的企业,产品通过UL,CE,ROHS国际认证.
-
线槽种类
线槽在办公室的安装细节需要要注意的是线槽种类,包括的深度和宽度,因为尺寸不足也会让地面在放线管后不平,到时候只有返工。