Wiring duct,Cable Gland,Cable Tie,Terminals,RCCN

Nylon cable joints can be applied to the environment with water, providing a safe and reliable connection. The most important thing is to achieve waterproofing. Then the waterproof cable joints must be careful and pay attention to some operations during installation and operation. The process and method of operation thus achieve the purpose of waterproofing.

Firstly, according to the type of cable connector required, you can choose the appropriate connector data. Now the quality of the cable connector is also uneven. However, in order to ensure the quality of the nylon cable connector, it is not recommended to be cheap. It is best to choose the cable connector manufacturer with reliable quality. .

Second: When it is a nylon cable connector, it is best not to choose rainy days, because the cable water will seriously affect the service life of the cable, and even a short circuit accident may occur.

Third: Before making a nylon cable connector, you must carefully read the manufacturer's product manual. This is especially important for cables of 10kV and above. Do all the processes before you do it.

Fourth: Terminal joints of single-core armored cables above 10kV, bearing in mind that only one end of the steel strip is grounded.

Fifth: When the copper tube is restricted, it should not be too hard. Just press it into place. The copper end face after crimping will have many raised points. This must be flattened with a file, and no burrs can be left.

Sixth: Heat-shrinkable nylon cable joints When using the blowtorch, pay attention to the movement of the blowtorch, and not only keep supplying fire in one direction.

Seventh: The scale of the cold-shrinkable nylon cable joint must be strictly in accordance with the drawing instructions, especially when extracting the support in the reserved tube, it is more important to be careful.