Wiring duct,Cable Gland,Cable Tie,Terminals,RCCN

There are many standard requirements for the design and production of wire harness products. In fact, the main purpose of the product is to use electricity.

1. The plastic protective layer on the surface of the product must be consistent in elasticity.

2. When using plastic protective film, pay attention to the fact that its products must be harmless and have no displacement.

3. When the product is bandaged, whether it is a corrugated tube or other plastic tube, it must be glued.

4. When assembling the product, it must be noted that there must be no misalignment, and the jacket of the terminal of the product should not come out.

5. After the production is completed, all product labels must be complete, the insulation effect on the product surface must be good, and the inside will not be crushed.