RCCN WeChat QrCode
Mobile WebSite
Nowadays, the application of the end is more and more extensive. Everyone knows that the end is composed of two parts: the insulating material and the electric conductor. These two parts determine the insulation and electrical conductivity of the end, so these two parts The quality is directly related to the quality of the entire end. Because the tip is used in some conductive projects, if there is a problem at one end, it may cause problems in the whole system. Therefore, before the fault occurs at the end, we must prevent it in time. When the end fails, we want Fix it in time. In a certain way, prevention is more important than repair, and it can ensure the stability and reliability of the end in use.
Generally, the three major factors that may cause the terminal to malfunction are poor contact, poor insulation, and poor fixation.
Today, I will tell you about the faulty factor of contact failure. In the above, we also said that the insulating material and the conductor are the two core components in the end. The conductor is the voltage that carries the external wires or cables into the voltage. Corresponding contact parts, so the contact parts must have an excellent structure, in order to maintain stable contact and allow the voltage to be stably transported, so the prevention of contact failure is the use of structurally reasonable contacts. The selected material should also be of high quality, and the contact parts produced by the advanced processing technology should be combined, and then the protection work should be done in the storage process after the assembly is completed. If the above situation occurs, the terminal also has a faulty factor such as poor contact. We need to consider whether it is in some harsh environment during the use of the terminal or whether there are any improper operation behaviors during use. This can lead to contact and contact between the two parts.
The above is some of the factors that cause the contact failure. We can do some preventive work to ensure that the tip reduces contact failure during use.
