Problems in wire harness processing and solutions

Wire harness processing, there will often be some problems, such as label affixed to go ah!

Such things as removing the needles when putting on the plastic shell, such as the wiring harness in question, will lose a lot of money if all are thrown away. So how do we deal with these problems? Here are some suggestions, we may wish to see.

1. The reason why the label can not be affixed is:

There are oil stains on the harness, or the label itself has a certain amount of aging glue, in this case, you can paste in the hands when not in direct contact with quit plastic surface. First affixed to a clean metal top, and then one by one to the top of the paste.

2. When taking the plastic shell off the needle;

In this case, in fact, we only need to insert a hole in each time there is a pull back action can solve this problem,

3. Harness stained with tin:

If the wire harness stained with tin, it may lead to PVC shrinkage, encounter this situation there are many possibilities, if many are the case, you should check whether the process of any problems, timely adjustment of processing Technology, if it is a wire problem, we must promptly replace the wire.